E22-400M30S Sx1262 30dBm SPI 12Km Ebyte 400Mhz Lora SMD Sx1268-ZZ teco -LoRa/WiFi/BLE/ZigBee wireless modules Manufacturers, industrial IoT terminals suppliers

SEMTECH SX1268 Rf transceiver module

HIGH QUALITY INDUSTRIAL COMPONENTS

32MHz High-precision TCXO

New tech, higher efficiency

RF Parameter	Value	Remark
Working frequency	410~493 MHz	-
Transmitting power	30 dBm	Max. Power (1W)
Receiving sensitivity	-150 dBm	-
Air data rate	0.018k~300kbps	-
Test distance	12000m	In open and clear air, with maximum power, 5dBi antenna gain, height of 2m

Electronic parameter	Min.	Typ.	Max.	Unit	Condition
Power supply	2.5	5	5.5	V
Communication level	1.8	3.3	3.7	V
Transmitting current	600	650	700	mA	30dBm（1W）
Receiving current	12	14	16	mA
Sleep current	1	3	5	nA
Operating temperature	-40	20	+85	℃
Operating humidity	10	60	90	%
Storage temperature	-40	20	+125	℃

Pin No.	Pin Item	Pin Direction	Pin Application
1	GND	-	Ground wire, connected to the power reference ground
2	GND	-	Ground wire, connected to the power reference ground
3	GND	-	Ground wire, connected to the power reference ground
4	GND	-	Ground wire, connected to the power reference ground
5	GND	-	Ground wire, connected to the power reference ground
6	RXEN	Input	RF switch RX control，connecting external MCU IO, valid in high level
7	TXEN	Input	RF switch TX control，connecting external MCU IO or DIO2, valid in high level
8	DIO2	Input/Output	Configurable universal IO port (see SX1262 manual for details)
9	VCC	-	Power supply, 2.5V~5.5V（external ceramic filter capacitoris recommended）
10	VCC	-	Power supply, 2.5V~5.5V（external ceramic filter capacitoris recommended）
11	GND	-	Ground wire, connected to the power reference ground
12	GND	-	Ground wire, connected to the power reference ground
13	DIO1	Input/Output	Configurable IO port（see more in SX1262 datasheet）
14	BUSY	Output	For status indication (see SX1262 manual for details)
15	NRST	Input	Chip reset trigger input pin, valid in low level
16	MISO	Output	SPI data output pin
17	MOSI	Input	SPI data output pin
18	SCK	Input	SPI data output pin
19	NSS	Input	Module chip select pin for starting an SPI communication
20	GND	-	Ground wire, connected to the power reference ground
21	ANT	-	Antenna interface, stamp hole (50 ohm characteristic impedance)
22	GND	-	Ground wire, connected to the power reference ground

E22-400M30S Sx1262 30dBm SPI 12Km Ebyte 400Mhz Lora SMD Sx1268