LoRa

  1. Location
  2. Home
  3. Module
  4. LoRa
E72-2G4M05S1G CC2642, 2.4GHz, ble 5.2 wireless module
E72-2G4M05S1G CC2642, 2.4GHz, ble 5.2 wireless module
E72-2G4M05S1G CC2642, 2.4GHz, ble 5.2 wireless module
E72-2G4M05S1G CC2642, 2.4GHz, ble 5.2 wireless module

E72-2G4M05S1G CC2642, 2.4GHz, ble 5.2 wireless module

[Chip solution]：CC2642R

[Support protocol]：BLE 5.2

[Working frequency]： 2.4~2.48GHz

[Transmit power]：5dBm

[Communication distance]：150m/500m

[Product size]：17.5*28.7mm

[Product weight]：1.9±0.1g

[Introduction]：E72-2G4M05S1G is a small-volume patch type ble 5.2 protocol ble module independently developed based on the CC2642R produced by Texas Instruments (TI) in the United States. It has a built-in ARM dual-core processor and a 48MHz industrial-grade high-precision low-temperature drift active crystal oscillator.

E72-2G4M05S1G-Wireless SoC Module

Adopt New ZigBee Technology

E72 Series With RF Shield

Agilent Spectrogram

High-quality Industrial-grade Components

Application Scenario

Main parametersParameter valueRemark
reference distance150m/500mSunny and open space, antenna gain 5dBi, height 2.5 meters, air rate 250kbps
Crystal frequency48MHz/32.768k    -
supporting agreementBLE 5.2    -
Packaging methodSMD
    -
Interface mode1.27mm   -
IC full nameCC2642R    -
FLASH352KB    -
RAM88KB    -
KernelCortex-M4    -
Dimensions17.5*28.7mm    -
Antenna interfacePCB/IPEXDefault PCB onboard antenna, equivalent impedance is about 50Ω
Main parametersMinimum valueTypical valueMaximum valueUnitRemark
Operating Voltage2.33.33.8V≥3.3V guarantees output power
Communication level-3-VUsing 5V TTL risks burning out
Emission current9.61010.12mAInstantaneous power consumption
receive current7.067.67.8mA-
Sleep current-1.2-μASoftware shutdown
Working frequency2402-2480MHzSupport ISM band
Operating temperature-40-85℃Industrial grade design
Maximum transmit power4.555.5dBm-
Receive sensitivity-98.5-99-100.5dBm150kbps over the air
Air speed125k-- 1MbpsUser Programmed Control


PIN
No. Pin Pin Direction Remarks
1GND-Ground wire, connected to the power reference ground
2GND-Ground wire, connected to the power reference ground
3GND-Ground wire, connected to the power reference ground
4DIO_0input /OutputGeneral IO port, sensor controller (see CC26xx manual for details)
5DIO_1input /OutputGeneral IO port, sensor controller (see CC26xx manual for details)
6DIO_2input /OutputGeneral IO port, sensor controller (see CC26xx manual for details)
7DIO_3input /OutputGeneral IO port, sensor controller (see CC26xx manual for details)
8DIO_4input /OutputGeneral IO port, sensor controller (see CC26xx manual for details)
9DIO_5input /OutputHigh-drive general-purpose IO port, sensor controller (see CC26xx manual for details)
10DIO_6input /OutputHigh-drive general-purpose IO port, sensor controller (see CC26xx manual for details)
11DIO_7input /OutputHigh-drive general-purpose IO port, sensor controller (see CC26xx manual for details)
12DIO_8input /OutputGeneral IO port, see CC26xx manual for details)
13DIO_9input /OutputGeneral IO port, see CC26xx manual for details)
14DIO_10input /OutputGeneral IO port, see CC26xx manual for details)
15DIO_11input /OutputGeneral IO port, see CC26xx manual for details)
16DIO_12input /OutputGeneral IO port, see CC26xx manual for details)
17DIO_13input /OutputGeneral IO port, see CC26xx manual for details)
18DIO_14input /OutputGeneral IO port, see CC26xx manual for details)
19DIO_15input /OutputGeneral IO port, see CC26xx manual for details)
20JTAG_TMSinput /OutputJTAG_TMSC, high drive capability (see CC26xx manual for details)
21JTAG_TCKinput /OutputJTAG_TCKC, high drive capability (see CC26xx manual for details)
22DIO_16input /OutputHigh-drive general-purpose IO port, JTAG_TDO (see CC26xx manual for details)
23DIO_17input /OutputHigh-drive general-purpose IO port, JTAG_TDI (see CC26xx manual for details)
24DIO_18input /OutputGeneral IO port, see CC26xx manual for details)
25DIO_19input /OutputGeneral IO port, see CC26xx manual for details)
26DIO_20input /OutputGeneral IO port, please refer to CC26xx manual for details)
27GND-Ground wire, connected to the power reference ground
28DIO_21input /OutputGeneral IO port, see CC26xx manual for details)
29VCC-Power supply, 1.8～3.8V
30DIO_22input /OutputGeneral IO port, see CC26xx manual for details)
31DIO_23input /OutputGeneral IO port, sensor controller, digital-analog (see CC26xx manual for details)
32nRESETinputReset, low level (see CC26xx manual for details)
33DIO_24input /OutputGeneral IO port, sensor controller, digital-analog (see CC26xx manual for details)
34DIO_25input /OutputGeneral IO port, sensor controller, digital-analog (see CC26xx manual for details)
35DIO_26input /OutputGeneral IO port, sensor controller, digital-analog (see CC26xx manual for details)
36DIO_27input /OutputGeneral IO port, sensor controller, digital-analog (see CC26xx manual for details)
37DIO_28input /OutputGeneral IO port, sensor controller, digital-analog (see CC26xx manual for details)
38DIO_29input /OutputGeneral IO port, sensor controller, digital-analog (see CC26xx manual for details)
39DIO_30input /OutputGeneral IO port, sensor controller, digital-analog (see CC26xx manual for details)
40GND-Ground wire, connected to the power reference ground
41GND-Ground wire, connected to the power reference ground
42GND-Ground wire, connected to the power reference ground



Populars

home
product
news
contact