LoRa

  1. Location
  2. Home
  3. Module
  4. LoRa
E72-2G4M20S1E Ebyte CC2652P 2.4G Low Energy BLE 5.0 Multi-protocol Wireless Communication Module with PCB Antenna
E72-2G4M20S1E Ebyte CC2652P 2.4G Low Energy BLE 5.0 Multi-protocol Wireless Communication Module with PCB Antenna
E72-2G4M20S1E Ebyte CC2652P 2.4G Low Energy BLE 5.0 Multi-protocol Wireless Communication Module with PCB Antenna

E72-2G4M20S1E Ebyte CC2652P 2.4G Low Energy BLE 5.0 Multi-protocol Wireless Communication Module with PCB Antenna

[IC]：CC2652P

[Frequency]：2.400~2.480 GHz

[Power]：20 dBm

[Distance]：700 m

[Size]：28.7*17.5 mm

[Weight]：1.9±0.1 g

[Introduction]：E72-2G4M20S1E is a multi-protocol 2.4GHz SMD wireless system-on-chip module independently developed by TI based on the CC2652P produced by TI. The transmit power is 20dBm. Integrated ARM microcontroller and high-performance wireless transceiver. Built-in ZigBee3.0 firmware, please check the Link72 page for details.

New-arrivals-in-February!-Free-trial-of-all-module-products!

E72-2G4M20S1E Ebyte CC2652P 2.4G Low Energy BLE 5.0 Multi-protocol


Main ParametersMin.Max.Remarks
Power supply (V)03.8Voltage over 3.8V will cause permanent damage to module
Blocking power (dBm)-10Chances of burn is slim when modules are used in shortdistance
Operating temperature (℃)-40+85Industrial grade
Main ParametersMin.Typ.Max.Remarks
Operating voltage (V)1.93.33.8≥3.3V ensures output power
Communication level (V)-3.3-For 5V TTL, it may be at risk of burning down
Operating temperature (℃)-40-85Industrial design
Operating frequency (MHz)2400-2480-
TX Current (mA)-106-Instantaneous power consumption @20dBm
RX current (mA)-7.3--
Max Tx power (dBm)1919.520-
Receiving sensitivity (dBm)--105-Bluetooth 125-kbps (LE Coded PHY)
Main parameterDescriptionRemarks
Reference distance700mTest condition: clear and open area, antenna gain: 5 dBi, antenna height: 2 m, air data rate: 150 kbps
Crystal frequency48MHz/32.768kHigh speed 48MHz/low speed 32.768k
ProtocolBluetooth 5 Low Energy
Zigbee
Thread		-
PackageSMD-
Interface1.27mmStamp hole
ICCC2652P1FRGZ-
FLASH352KB-
RAM80KB-
CoreArm® Cortex®-M4F-
Size28.7*17.5mm-
AntennaPCB on-board antenna50 ohm impedance
Weight1.9±0.1g-


1
Module pin sequence numberModule pin nameChip pinDirectionDescription
1GND--Ground, connecting to power source referential ground
2DIO_7DIO_7Input/OutputGPIO,high-drive capability(see CC2652P1FRGZ manual for details)
3DIO_8DIO_8Input/OutputGPIO(see CC2652P1FRGZ manual for details)
4DIO_9DIO_9Input/OutputGPIO(see CC2652P1FRGZ manual for details)
5DIO_10DIO_10Input/OutputGPIO(see CC2652P1FRGZ manual for details)
6DIO_11DIO_11Input/OutputGPIO(see CC2652P1FRGZ manual for details)
7DIO_12DIO_12Input/OutputGPIO(see CC2652P1FRGZ manual for details)
8DIO_13DIO_13Input/OutputGPIO(see CC2652P1FRGZ manual for details)
9DIO14DIO_14Input/OutputGPIO(see CC2652P1FRGZ manual for details)
10DIO_15DIO_15Input/OutputGPIO(see CC2652P1FRGZ manual for details)
11GND--Ground, connecting to power source referential ground
12GND--Ground, connecting to power source referential ground
13JTAG_TMSCJTAG_TMSCInput/OutputJTAG TMSC, high-drive capability
14JTAG_TCKCJTAG_TCKCInputJTAG_TCKC
15DIO_16DIO_16Input/OutputGPIO,  JTAG_TDO. high-drive capability(see CC2652P1FRGZ manual for details)
16DIO_17DIO_17Input/OutputGPIO, JTAG_TDL high-drive capability (see CC2652P1FRGZ manual for details)
17DIO_18DIO_18Input/OutputGPIO (see CC2652P1FRGZ manual for details)
18DIO_19DIO_19Input/OutputGPIO(see CC2652P1FRGZ manual for details)
19GND-Input/OutputGround, connecting to power source referential ground
20VCC--Module power supply is positive reference voltage, voltage range L9 〜 3.8V
21DIO_20DIO_20Input/OutputGPIO (see CC2652P1FRGZ manual for details)
22DIO_21DIO_21Input/OutputGPIO (see CC2652P1FRGZ manual for details)
23GND-Input/OutputGround, connecting to power source referential ground
24RESET_NRESET_NInputReset pin. low level effective.
25DIO_22DIO_22Input/OutputGPIO (see CC2652P1FRGZ manual for details)
26DIO_23DIO_23Input/OutputGPIO, analog capability(see CC2652P1FRGZ manual for details)
27DIO_24DIO_24Input/OutputGPIO, analog capability (see CC2652P1FRGZ manual for details)
28DIO_25DIO_25Input/OutputGPIO, analog capability(see CC2652P1FRGZ manual for details)
29DIO_26DIO_26Input/OutputGPIO,  analog capability (see CC2652P1FRGZ manual for details)
30DIO_27DIO_27Input/OutputGPIO,  analog capabilityr(see CC2652P1FRGZ manual for details)
31DIO28DIO_28Input/OutputGPIO,  analog capability (see CC2652P1FRGZ manual for details)
32 DIO_29 DIO_29 Input/OutputGPIO, analog capability(see CC2652P1FRGZ manual for details)
33DIO_30 DIO_30Input/Output GPIO, analog capability (see CC2652P1FRGZ manual for details)
34GND - Input/OutputGround, connecting to power source referential ground


Populars

home
product
news
contact